Road Runner Guide to the Internet
Quick Telnet Guide
* for a directory listing type "ls"
* the following guides support simga-x 1.06 and x2
* all commands are case sEnsiTive, so type carefully
* all guides assume u start from the root dir "CM\"
* commands can be abbreviated using less characters. ex:
"enable force t" = "enabledocsispram force_cfgfile true"
* use "cd .." to go back a directory [space after the cd]
* to repeat previous commands press the up arrow
* for specific command details use "help [enter command here]"
* you must 'save' settings after any change when possible
U [UpdateSettings] for sigma-x 1.06, [make sure its a capital U] or
w [write] for sigma-x2 [lowercase w]
open command prompt [start-->run-->cmd]
type: telnet 192.168.100.1 [press enter a few times]
----------------------------------------------------------------------------
|\___/| Isabella says: -- /O\ --
) ( "Don't Believe Any of it, ' `
=\ /= its all true" ___
+)===( /|_\`.
/ /| \ CatTel Console/telnetd v0.1 /__|_\/`.
| \ \ | for VxWorks/MIPS /__|__|\/.`.
/ \ \ \ /_|__|__|\/`/`
\ / / / SIGMA - X /|__|___|__\/`/
\_/_/_/ /__|___|___|_\/
CM\
CM\
---------------------------------------------------------------
MiniGuides
1. diable dhcp server
2. enable/disable bpi [+]
3. disable filters [refer to faq]
4. enable factory mode [refer to faq]
5. stop modem from scanning [keeps text from scrolling in telnet]