Convert Router To Dual WAN:

• Flash Default Router Firmware:
  a. download firmware mini_generic.bin
  b. log into router, and use the firmware upgrade interface to update the router
  c. click here for detailed firmware installation instructions

• VLAN Configuration: [Telnet] login/pass = root/admin
  a. telnet into router using default 192.168.1.1 address
  b. paste contents of this file line by line into the command line.

• Install Router Scripts: [Administration Tab]
  • Enable SSH & JFFS2
  a. under services, enable sshd, & password login. click save
  b. under managment, enable jffs2 & clean jffs2. click apply.
  c. followed by disable clean jffs2, then click save
  d. in the commands tab. paste contents of this file and click "save startup"
  e. same tab, paste contents of this text file and click "save firewall"
  
  • Start WINSCP
  a. run WinSCP from the dual wan kit and log into router
  b. make a new folder called "scripts" in the "jffs" folder. should look like this
  c. transfer the scripts included with the kit into the "scripts" folder
  d. transfer the iptables file into the jffs folder using "binary" transfer method
  e. right click the jffs folder & select properties. copy this configuration & apply
  • Overclock Router [Optional]
  a. under managment change default speed from 200mhz to 250mhz
  b. click save, then reboot. keep router in a well ventilated area. enjoy.