Convert Router To Dual WAN:

• Flash Router Firmware:
  a. download firmware: mini_wrt310n.bin
  b. log into router and upgrade firmware

• VLAN Configuration:
  a. telnet into router using default 192.168.1.1 address
  b. paste contents of this file line by line into the command line.

• Configure & Install Dual WAN Scripts:
  • Enable SSH & JFFS2
  a. click the services tab. enable sshd, and password login. click save
  b. next, click the admin tab. enable jffs2 & clean jffs2. click apply.
  c. wait a few seconds, followed by disable clean jffs2, then click save.
  d. in the commands tab. paste contents of this file and click "save startup"
  e. same tab, paste contents of this text file and click "save firewall" reboot
  
  • Upload Scripts
  a. run WinSCP from the dual wan kit and log into router
  b. make a new folder called "scripts" in the "jffs" folder. should look like this
  c. transfer the scripts included with the kit into the "scripts" folder
  d. transfer the iptables file into the jffs folder using "binary" transfer method
  e. right click the jffs folder & select properties. copy this configuration & apply
  f. reboot, done.
  • Overclock Router [Optional]
  a. under managment change default speed from 300mhz to 330mhz
  b. click save, then reboot. keep router in a well ventilated area. enjoy.